K
Kathleen Johnson DDSSep 12, 2025
Can I playback while recording on Cobra 63890?
- NncamachoSep 12, 2025
Yes, the Cobra DVR system supports playback during recording.
To Next PageTo Next PageCan I playback while recording on Cobra 63890?
Yes, the Cobra DVR system supports playback during recording.
How to clear records from Cobra 63890’s HDD?
Due to file security, you cannot clear parts of records from the Cobra DVR’s HDD. To remove all records, you must format the HDD.
How to stop recording on Cobra 63890?
To stop recording on your Cobra DVR, change the recording setting to 'No Record'. To stop Startup recording, change the record mode to scheduled recording or manual recording. You can also set the channel status to 'Off' in the Record setting.
General| GPS | Yes |
|---|---|
| G-Sensor | Yes |
| Loop Recording | Yes |
| Channels | 1 |
| Remote Viewing | No |
| Motion Detection | Yes |
| Night Vision | Yes |
| Operating System | Not applicable |
Safety measures before installing surveillance equipment, ensuring proper footing and balance.
Guidelines for safe usage, emphasizing it's not a toy and should be used as intended.
Precautions to prevent electric shock and damage to cameras and power adapters during use.
Safety guidelines for the DVR, including airflow, power adapter use, and avoiding disassembly.
Technical specifications for the DVR unit, including storage, video format, I/O, and resolution.
Technical specifications for the cameras, covering lens, resolution, night vision, and environmental ratings.
Information on connecting the DVR for remote viewing via smartphone app.
Guides through initial DVR setup steps like HDD formatting and network configuration.
Details on setting up network parameters like DHCP, PPPoE, or Static IP for internet connectivity.
How to define recording modes (Normal, Motion, Alarm) for each channel based on time.
Settings for date, time, language, video format, and other system-wide parameters.
Detailed setup for network types (DHCP, PPPoE, Static, 3G) and parameters like IP address and gateway.
Configuring motion detection sensitivity, areas, post-recording, and notifications.
How to search for recorded video based on channel, date, and type (Normal, Motion, Alarm).
How to search for specific events, view recording lists, and make backups to a USB drive.
How to format, check health (S.M.A.R.T.), and configure HDD settings like overwrite and eSATA recording.
Settings for PTZ cameras, including protocol, baudrate, data bits, parity, and cruise mode.
How to use the control panel to pan, tilt, zoom, focus, and set preset points for PTZ cameras.
Steps to download and install the necessary web client plugin for browsers like IE, Chrome, and Firefox.
Instructions for downloading, installing, and setting up the mobile app for remote DVR access.
A guide to diagnosing and resolving common issues like HDD detection, password loss, video signal problems, and network connectivity.
