Cobra 63890 User Manual

Page 29For technical questions, please call 1-888-866-5797.Item 63890
DST
Figure BF
DST: Enable if Daylight Saving Time
(DST) is observed in your region.
Time Offset: Select the amount of time to offset for DST.
Daylight Saving Time: Choose to set the
daylight saving time in weeks or in days.
Start Time/End Time: Set the start time
and end time for daylight saving.
NTP
Note: NTP stands for Network Time Protocol.
This feature allows you to synchronize the date
and time automatically over the Internet. DVR
needs to be connected to the internet.
Figure BG
Note: Enable if you want the DVR to update
the date and time automatically.
Server Address: Select the NTP
(Network Time Protocol) server.
Time Zone: Select the Time Zone in your location.
Update Time: Click here to update the
system date and time immediately.
Note: When NTP function is enabled, system will
update the system time at 00:07:50 every day,
or every time when the system is started up.
Users
Note: This menu allows you to configure
the user login information.
Figure BH
1. To enable/disable the user account, modify the
user name and password, click on the user account
you wish to edit, then click Edit. See Figure BI.
Figure BI
2. To modify user access permissions, click on
the user account you wish to modify, then click
Permission. The user in Admin level has all
permissions to the system. After modifying the
permissions, click Save to save the modifications.
Figure BJ

Cobra 63890 Specifications

General

GPS	Yes
G-Sensor	Yes
Loop Recording	Yes
Channels	1
Remote Viewing	No
Motion Detection	Yes
Night Vision	Yes
Operating System	Not applicable