9. Bluetooth - C8500 ONLY
This Snooper is equipped with Bluetooth functionality. You can use it as a
hands free system for a mobile phone that is equipped with Bluetooth
and for TMPS (see section 10 for details).
Press the centre of the screen to enter the ‘Navigate to’ menu.
Press the ‘Configure’ button.
Press the ‘Bluetooth’ icon.
This screen (fig. 1) shows that there are no devices are currently paired with the unit.
Press ‘Search Device’ then press ‘Search’ to start the pairing process.
NOTE: Ensure that Bluetooth is active and that the telephone and/or Bluetooth device
that the is in ‘discovery mode’ (refer to the mobile phone user guide for instructions)
before starting the pairing process.
As devices are found they will appear in the
device list.
To complete the pairing process select the
device and press ‘Pair’ .
Note: To complete the pairing process
action may need to be taken on the
mobile phone (accept or agree to
pairing).
For TPMS (STP1600/STP1800) Tyre Pilot
no further action is necessary. Refer to
page 84 for TMPS detailed instructions.
Bluetooth Off Bluetooth ON but No devices are paired Bluetooth ON and two devices are paired
Pairing with a mobile telephone
Pairing with Tyre Pilot STP1600/STP1800
fig. 1
To Next Page
Loading...
Need help?
General
