Once pairing has completed the following
screen will be displayed (2)
Note: The unit and Bluetooth device are
paired BUT not connected.
Press ‘Connect’ to complete the
connection process.
All available Bluetooth protocols will be displayed next to the Blutetooth device name
(3)
Repeat the process for each device., phone , TPMS etc
9. 1 Bluetooth main menu
1. Displays devices which are connected to the unit.
2. Switch Bluetooth On and Off (see section above)
3. Press to show, edit , connect or delete Bluetooth devices currently paired
or connected to the unit (see section above)
4. Press to access the dial pad, call features and call logs. To make a call
enter the telephone number, by using the keypad, then press ‘Call’ the
following screens will be displayed.
Once the connection is made this screen will be displayed
1. Current telephone call (status of call)
2. Duration of current call
3. Return to previous screen
4. Adjust volume
5. Mute microphone
6. Place the call on hold/unhold
7. Add a call (conference call)
8. Terminate the call
9. Transfer the call between phone
and unit
10. Swap between conference calls.
11. Merge conference calls
2
1
2 3 4
5 6
3
Screen showing status of conference call
1
4
2
3
5
6
7
8
9
10
11
To Next Page
Loading...
Need help?
General
