10. Tyre Pressure Monitoring System (TPMS)
The Snooper Tyre Pilot application can monitor up to 22 tyres
simultaneously, there are various kits and sensors available from your
Snooper dealer or from www.snooper.co.uk. Refer to the accessories list
on page 102
The basic starter kit you will need is either STP1800 or STP1600 (depending
on the vehicle type), this kit includes a bluetooth interface which is necessary
to connect the sensors to the unit.
To connect the interface with the unit open the Bluetooth menu > Configure
> Bluetooth
On the Bluetooth interface press and hold the White button (1) until the unit beeps and the
Red LED starts to flash (the TPMS interface is now in discovery mode)
In the Bluetooth menu press ‘Search Device’ then press ‘Search ‘ to start the pairing process.
As the TPMS interface is discoverd it will appear in device list. To complete the pairing process select TMPS the device and press ‘Pair’
Press the button (1) to return to the previous screen. Highlight TPMS and press ‘Connect’
TPMS is now connected press button (1) to return to the Bluetooth menu.
Bluetooth Off Bluetooth ON but No devices are paired Bluetooth ON and two devices are paired
1
To Next Page
Loading...
Need help?
General
