TN750 ET-1 Transportable Radio System Case
MT-3/4 Radio Systems
TECHNICAL NOTES
Page 1 of 2
LMRSALES@CODANCOMMS.COM
CODANCOMMS.COMTECHNICAL NOTE:
TN750, REV 6-0-0, © May 2014
CANADA/US +1 250 382 8268 | TOLL FREE +1 800 664 4066
The ET-1 transportable radio system case is a rugged, weatherproof case constructed from high density polyethylene
with reinforced walls. It has recessed handles, smooth latches, anodized valences and a pressure relief valve. The
rack is shock mounted and the lid gasket is water tight. Any standard 19” Codan subrack can be mounted inside.
Racks are mounted inside the front and back of the case. Codan subracks can be mounted back to back on both
front and back racks. Optional duplexers can also be mounted inside the case in the 19” rack. Contact the factory
for weight limitations.
The transportable radio case is available in four sizes, a 6 RU (Rack Unit) height, a 9 RU (Rack Unit) height., a 12
RU (Rack Unit) height, and a 15 RU (Rack Unit) height. Contact the factory for other heights available.
Dimensions for ET-1-A06-00 (6 RU Height Shelf)
Outside Depth: 31” (78.7 cm) Internal Rack Depth: 20” (50.8 cm)
Outside Width: 26” (66 cm) Internal Rack Width: 19” (standard mounting)
Outside Height: 18.4” (46.7 cm) Internal Rack Height: 10.625” (27 cm)
Weight (Case Only): 44 lbs. (19.96 kg)
Dimensions for ET-1-A09-00 (9 RU Height Shelf)
Outside Depth: 31” (78.7 cm) Internal Rack Depth: 20” (50.8 cm)
Outside Width: 26” (66 cm) Internal Rack Width: 19” (standard mounting)
Outside Height: 23.4” (59.4 cm) Internal Rack Height: 15.875” (40.3 cm)
Weight (Case Only): 58 lbs. (26.31 kg)
To Next Page
Loading...
Need help?
General