TN710 ET-3 Transportable Radio System Case
MT-3/4 Radio Systems
TECHNICAL NOTES
Page 1 of 2
LMRSALES@CODANCOMMS.COM
CODANCOMMS.COMTECHNICAL NOTE:
TN710, REV 10-0-0, © Aug 2016
CANADA/US +1 250 382 8268 | TOLL FREE +1 800 664 4066
The ET-3 transportable radio system case is a rugged, waterproof aluminum case. Any standard 19” Codan subrack
can be mounted inside for repeater, crossband or base confi gurations.
The ET-3-03-00 Orange Transportable Case includes the following:
• 19” internal mounting frame for subrack and duplexers.
• smooth tamperproof and lockable latches.
• spring retracted stainless steel handles.
• pressure relief valve.
• pressure sealed RF and power inputs.
• metal cover on lid for magnetic mount antennas.
• optional internal AC to DC power supply.
The transportable radio case is 21” (53.3 cm) wide, 11” (27.9 cm) high and 15” (38.1 cm) deep, and weighs 35 lbs.
(15.88 kg) with typical radio package installed (10 lbs. or 4.54 kg empty).
Frequency band RF Power Output Internal duplexer frequency separation
AM 1.0 - 3.0 Watts No duplexer available
Lowband VHF 0.5 - 3.0 Watts No duplexer available
Highband VHF 0.5 - 8.0 or 30 Watts ≥ 2.0 MHz or ≥ 4.5 MHz separation
400 MHz UHF 0.5 - 8.0 or 30 Watts ≥ 5.0 MHz separation
700 MHz UHF 0.5 - 3.0 Watts ≥ 30 MHz separation
800 MHz UHF 0.5 - 3.0 Watts ≥ 45 MHz separation
900 MHz UHF 0.5 - 3.0 Watts ≥ 24 MHz or ≥ 39 MHz separation
To Next Page
Loading...
Need help?
General