9 -
Single
I Double Pulse Start:
Switches the remote start activation between a
single or
double
press from the transmitter.
10
-
IGN
2
Output:
Programmable
high current output.
Ignition 2
-
Ignition
output during remote start.
Accessory- Accessory output during remote start.
Start
I
Crank -
Crank
output during remote start.
11
- 2 or 3 Hour
Start:
When activated, the remote start
will
activate and run for the
programmed time and shut down every 2 or 3 hours.
12 - 14 Not available
on
this
model.
15 -Accessory
Output:
Programmable
high current output.
Accessory - Output becomes active with the same timing as the accessory
output, drops out during crank.
Ignition
- Output becomes active with the same timing as the ignition output
and does not drop out during crank.
Start
I
Crank
- Output becomes active with the same timing as the starter
output wire, during crank
only.
2014
Voxx
Electronics Corporation.
All
rights reserved.
23
To Next Page
Loading...
