C001537_04_CR2 User Manual - 40
Save Settings
Scan the following codes to set appropriate keyboard mapping:
US Keyboard Mapping (Default) Universal Keyboard Mapping Custom Keyboard
There is more keyboard support on the Code website at:
http://www.codecorp.com/support/specialinstructions.htm
If you require a special configuration, please contact Code at (801) 495-2200.
5.7 - Keyboard Support
Will only work in versions 2098 and above. Scan one of the codes below to set the amount of time a
cabled CR2 will be enumerated before entering sleep mode in order to charge the battery:
Cabled - 2 hours (Default) Cabled - Always
5.8 - Cabled Reader - Time Out Settings
To Next Page
Loading...
