C001537_04_CR2 User Manual - 61
Save Settings
Suffix - Tab Suffix - Tab Suffix - Erase / None
10.4 - Reader Text Commands
Enabling Reader Text Commands, allows the CR2 to accept text commands via RS232 or RF com-
mmunication. Scan the following codes to enable/disable reader text commands:
Reader Text Commands On (Default) Reader Text Commands Off
Only Use with USB
Keyboard, PS/2
Keyboard Mode or
with CodeXML Router
or PS/2 CodeXML
Bluetooth Modem
Only Use with
RS232 Mode
10.2 - Suffix Settings (con’t)
10.3 - Prefix & Suffix Settings
Scan the following codes to erase all prefix and suffix data.
Erase Prefix & Suffix Data
To Next Page
Loading...
