Setting Up Your DataMan 8600
Install the DataMan SetupTool
1. Check the DataMan Release Notes for a full list of system requirements.
2. Download the DataMan Setup Tool from cognex.com/support/dataman and follow the on-screen steps.
3. Connect the DataMan 8600 to your PC.
4. Launch the DataMan Setup Tool and click Refresh. The reader or the base station appears under COM ports or
Network devices.
5. Select a COM port or a Network device and click Connect.
Setting Up the Reader
To connect to the reader or base station on your computer:
14
Setting Up Your DataMan 8600
To Next Page
