- 19 -
3.5 MACHINE LOCATION
The machine is provided with wheels for its easy location; such wheels are equipped with
mechanical locks, which once engaged, lock the wheels and so keep the machine standstill.
3.6 CLEANOUT
Eliminate dust from machine, as well as the protective material the machine was strewed with.
Use just water and, if need be, add a soap-based mild detergent with a soft cloth.
ATTENTION!
Never use neither solvents, alcohol or detergents that may damage the machine parts and
contaminate parts coming into contact with product.
3.7 REFILLING
Motor installed in the machine is of the type with lubrication for life; no action of checking/
replacing or topping up is necessary.
Gas filling necessary to the freezing system is carried out at COLDELITE works during
machine postproduction testing .
If a gas addition happens to be made, this must be carried out by skilled technicans, only, who
can also find out trouble origin.
3.8 MACHINE TESTING
A postproduction test of the machine is carried out at COLDELITE premises; operation and
output functionality of the machine are thoroughly tested.
Machine test at end user's must be carried out by skilled technicians or by one of COLDELITE
engineers.
After the machine positioning and correct connections, also carry out all operations necessary
to functional check and test of the machine.
To Next Page
Loading...