- 29 -
The temperature set will blink and can be changed by means of buttons and ; to
confirm the value, press again or wait for a few seconds.
Once the programmed temperature has been reached, inside the cylinder, the cooking cycle
starts.
When the cooking cycle ends, the beater inside the cylinder will keep on running until you
press or it will stop 3 minutes later, automatically..
To start beating in the cooking cylinder without starting any heating , press the key ,
and to switch the beater off, press .
NOTE:
After 3 minutes since the beater started running, the machine will automatically set at Stop
position in order to avoid a severe wear of both beater and cylinder.
CAUTION!
The front lid of heating/mixing side is provided with a thermal shield (safety protection).
Touching, however, the front lid when heating, cooking, mixing and in the following phases
is not advisable.
After mixing the mix you can it to the freezing cylinder by gradually lowering the lever 5.
5
To Next Page
Loading...
