36
5.0 IGNITION/STARTUP
Before connecting the appliance, please read the “Installation” section.
Connect the appliance to the mains. The display shows the system loading waiting image.
The initial start-up takes about 2 minutes during which time the system loads the program and runs a
self-test.
The first time you start the unit up, you will be prompted to set the language, date, time and time
zone.
Modi is equipped with a Wi-fi connection that allows connection to the Cosmo system, updating the
software and remote control of the appliance via the app.
Download the application by scanning the QR code.
Play Store Apple Store
5.1 LANGUAGE SETTING
The first time you turn on your appliance you are prompted to select a language.
After touching the screen the save page will be displayed for 2 seconds.
After 5 minutes of inactivity the screen switches to energy-saving mode, showing
the date and time. You can make your selection again by simply tapping on the
screen.
To change your language, select from the main menu Settings > Language.
5.2 SETTING DATE AND TIME
By connecting Modi to Cosmo, the appliance will automatically synchronize date
and time, if it is not possible to connect to Cosmo, you can set the date and
time manually.
To manually set the date and time, access the Settings menu and select
Date/Time
Set date and time using the and buttons.
Tap the
button to store your settings; the display will show the save page for 2
seconds.
By connecting the appliance to Cosmo it will automatically synchronize with the correct time. It is
necessary to set the correct time zone by selecting the geographical area to which it belongs.
This will allow the automatic updating of summer time.
To Next Page
Loading...
Need help?
General
