44
11.2 HEATING THE PROBE (MODI)
The PROBE HEATING function is active only if the heated core probe accessory
has been installed.
By tapping the UTILITIES>PROBE HEATING key, the heating of the needle that
facilitates the removal of the product is activated. At the end the message
"heating completed, remove the probe" will appear.
11.3 HACCP
The HACCP menu allows you to save to a USB stick and then view the data of all
performed cycles.
To export HACCP data, insert a USB stick, and press on Utilities>HACCP.
A screen will appear in which you can select the period for which you want to
export the data.
By pressing the "Export" key, a .csv file will be exported to the USB stick showing
the device serial number followed by year, month and day.
The generated file can be opened via PC using a spreadsheet software.
11.4 USB – Update / Backup
To UPDATE the software of the device, insert a USB stick containing the software
and press on UTILITIES>USB. The system recognizes the correct update files, you
can click on the UPDATE key and therefore you can proceed with the update.
To
, insert a USB stick and press on UTILITIES>USB>BACKUP. At the end
of the backup the system will reposition itself on the main screen and it will be
possible to remove the USB stick.
11.5 ALARM LOG
From the main menu by pressing on UTILITIES>ALARM LOG, you can view the alarm history selecting to
view the alarms recorded in the last week, in the last month, or all of them.
The ALARM LOG allows you to view the various alarms recorded with their start and end dates.
Pressing on the single alarm will open the alarm summary screen, where some information is shown.
To Next Page
Loading...
Need help?
General
