Coleman BT200X User Manual

Tires
1. Check tire pressure. Incorrect tire
pressure can affect the handling,
rider comfort, steering, tire life and
traction. Always check the tire pres-
sure before each ride.
Tire pressure
Front tires: 10psi
Rear tires: 10psi
TIRE PRESSURE
Chain tension
Check the tension of the chain , The chain
(1) tension should be
1/2 - 3/4 in. (15-20mm)
Chain tension (slack)
adjustment
1. Loosen bolt (2) on the rear axle
assembly.
2. Adjust chain tension by turning the
tension nuts (3) (Note: Tension nuts are
located on both sides of the mini bike.)
Clockwise will tighten the chain. Counter
clockwise will loosen the chain.
3. Once the chain is at the correct tension
re-tighten axle bolt (2).
4. Re-check chain tension.
1/2 - 3/4 in.
(15-20mm)
1
10
2
3

Coleman BT200X Specifications

General

Frame	Steel
Fuel System	Carburetor
Final Drive	Chain
Fuel Capacity	0.95 Gallons
Front Suspension	Telescopic fork
Front Brake	Disc
Front Tire	70/100-19
Rear Tire	90/100-16
Engine Type	Single Cylinder, 4-Stroke, Air Cooled
Weight	121 kg (267 lbs)
Weight Capacity	150 kg (330 lbs)
Wheelbase	1, 270 mm (50 inches)