Coleman BT200X - Pre-Ride Inspection

THROTTLE ADJUSTMENT
Performing maintenance and
checks while the engine is running
could be hazardous.
You could be severely injured by
moving parts or hot surfaces.
Never perform maintenance or
check procedures while the engine
is running with the exception of
checking the engine stop switch or
throttle.
!
WARNING
Failing to inspect and maintain the
Mini Bike could be hazardous.
Not following the pre-ride
inspection procedures could result
in loosing control of the Mini Bike
resulting in an accident or damage
to the Mini Bike
Always perform a Pre-ride inspec-
tion before each ride.
PRE-RIDE INSPECTION
!
WARNING
Inspecting and checking the
condition of the Mini Bike before
each ride is important. Following
the pre-ride check list will help
insure there are no problems which
could result in injury or becoming
stranded. Make sure the Mini
Bike is in good operating condition
before each ride.
WHAT TO
CHECK
CHECK FOR
Steering • Smoothness
• No restriction of
movement
Tires • Proper tire pressure
Fuel Tank • Enough fuel for the ride
• Fuel cap secure
• Hoses have no signs of
cracks or leaks
Throttle
grip
• Throttle grip snaps
back to idle when
released
• Operates freely
• Has correct free play
Engine
Stop
Switch
• Switch shuts off engine
when activated.
Engine
Oil
• Correct oil level
Drive
Chain
• Proper tension
• Lubricated
General
Condition
• All nuts and bolts tight
• No rattles from engine
or frame while running
Brakes • Proper brake lever
play
13