4
User Manual
1.3 Technical Data
Performance
Maximum trimming time 2.5 seconds
Max welding length 630 mm [24.8”]
Consumables
CoLibrì pre-formed covers and document pockets
The CoLibrì
e-DaVinci
book covering machine has been designed for exclusive use
with original CoLibrì material. The use of non-original CoLibrì material causes
malfunctioning and possible serious damages to the machine and voids the warranty on
the machine itself
Technical specifications
Overall dimensions 710(l) x 90(h) x 440(d) mm
[30”(l) x 3.54”(h) x 17.32”(d)]
Total weight 8 kg (16.8 lbs)
Power supply 115/230 VCA – 50/60 Hz
with 24V, 10A, 100kHz integrated insulation
transformer
Power absorption 400 W (2 seconds)
Max. welding bar temperature 160 °C (433 °K)
1.4 Identification/Warning Plates
The following identification/warning plates are applied to the welding head bottom cover of each
CoLibrì
e-DaVinci book covering machine:
1. It indicates to authorised and
trained staff that the power
cable must be disconnected
before removing the
protection cover.
2. It indicates that the protection
cover must not be removed
and that unauthorised or
untrained staff must not
access the electrical section.
3. Identification and C
E marking
plate. It represents the unique
product identification
recognised by the
manufacturer. The data
printed on this plate must be
indicated each time a service
is requested or when spare parts are ordered.
To Next Page
Loading...