32
MACHINE PREPARATION
MACHINE PREPARATIONMACHINE PREPARATION
MACHINE PREPARATION
BRUSH ASSEMBLY ABILA 17
BRUSH ASSEMBLY ABILA 17BRUSH ASSEMBLY ABILA 17
BRUSH ASSEMBLY ABILA 17
1. Push the pedal in order to lift the brush base.
2. With lifted brush base try to bring the brushes in the right position corresponding to
the junctions of the machine.
3. Let the brush base down by acting on the pedal.
4. Press the operator present control lever (6) and the brush will be hooked
automatically.
6
5. In order to vary the advancement speed act upon the knob indicated in the
illustration.
To Next Page
Loading...
