38
DAILY MAINTENANCE
DAILY MAINTENANCEDAILY MAINTENANCE
DAILY MAINTENANCE
BRUSHES DISASSEMBLY ABILA 42 52
BRUSHES DISASSEMBLY ABILA 42 52BRUSHES DISASSEMBLY ABILA 42 52
BRUSHES DISASSEMBLY ABILA 42 52
1.
Push lever down to raise the base.
2.
Turn key to OFF and remove it from the control panel (1)
WARNING!
WARNING! WARNING!
WARNING! Removing the brushes with power on may cause
injury to the hands.
1
3. Rotate the brush, with base raised, until it exits form the brush-bearing plate as
shown in the picture. The picture shows the direction of rotation for releasing the
right brush. Rotate in opposite direction for the left brush.
ATTENTION!
ATTENTION! ATTENTION!
ATTENTION! Make sure that no persons or object are nearby the brush
during this operation.
BRUSHES DISASSEMBLY ABILA 17
BRUSHES DISASSEMBLY ABILA 17BRUSHES DISASSEMBLY ABILA 17
BRUSHES DISASSEMBLY ABILA 17
1.
Lift the brush base through the pedal (push down).
2.
With brush base in lifted position operate the operator control lever, and the brush
will unhook automatically.
CLEANING SOLUTION FILTER
CLEANING SOLUTION FILTERCLEANING SOLUTION FILTER
CLEANING SOLUTION FILTER
1.
Take off the filter on the solution tank
2.
Clean it thoroughly
3.
Reassemble everything
ATTENTION!
ATTENTION!ATTENTION!
ATTENTION! Always wear gloves during this procedure, to avoid any
contact with dangerous substances.
To Next Page
Loading...
