14
WORK
OVERFLOW DEVICE
The machine is fitted with a float which intervenes when the recovery tank is full,
causing the suction tube to close. In this case, it is necessary to empty the recovery
tank, removing the drainage tube cap.
WARNING! This operation must be carried out wearing gloves to protect
against contact with dangerous solutions.
FORWARD MOVEMENTS (machines without traction)
The traction of these machines is obtained by means of the brush(es) which, working
slightly inclined, drag the machine forwards. To move the machine, you must raise the
brush base and then move it via the knobs on the handlebars.
WARNING! When making even brief reverse movements, check the
squeegee is raised.
FORWARD MOVEMENTS (machines with traction)
These machines are equipped with electronically commanded traction, with two speeds
forwards and one backwards.
To move the machine forwards, you must turn the key (1), wait three seconds then
press on the "man present" levers. To move the machine backwards, use the button
beneath the handlebars.
Press the lever by just a few millimetres to engage the first gear, or press it completely
to insert the second gear.
For backwards movements, the speed is reduced
WARNING! When making even brief reverse movements, check the
squeegee is raised.
To Next Page
Loading...
