ComAp IG-NTC GC

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
163
Value: LSO
Group
Sync/Load ctrl
Units
%
Related FW
3.0
Description
Load sharing output.
Value: SystLoadCtrl
Group
Sync/Load ctrl
Units
-
Related FW
3.0
Description
Code of the current load control mode. The description how to obtain the text
representation of each code can be found at the value Engine state.
Value: TotRunPact Q
Group
Sync/Load ctrl
Units
kVAr
Related FW
3.0
Description
Sum of reactive power of all banks within the group that are connected to the bus.
Value: TotRunPact P
Group
Sync/Load ctrl
Units
kW
Related FW
3.0
Description
Sum of active power of all banks within the group that are connected to the bus.
Value: netPgnomPh
Group
Sync/Load ctrl
Units
kW
Related FW
3.0
Description
Sum of nominal power of all banks within the group that are connected to the
bus.
Group: Volt/PF ctrl
Value: VSO
Group
Volt/PF ctrl
Units
%
Related FW
3.0