ComAp IG-NTC GC User Manual

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
180
Group: Statistics
Value: kWhours
Group
Statistics
Units
kWh
Related FW
3.0
Description
Active energy counter.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
Value: kVArhours
Group
Statistics
Units
kVAh
Related FW
3.0
Description
Reactive energy counter.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
Value: Run Hours
Group
Statistics
Units
h
Related FW
3.0
Description
Engine operation hours counter. If an ECU is configured and it provides engine
hours value, the value is taken from ECU. If the value is not available from the
ECU or ECU is not configured, the engine hours are incremented in the controller
while the engine is running.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
Value: Num starts
Group
Statistics
Units
-
Related FW
3.0
Description
Engine start commands counter. The counter is increased by 1 even if the
particular start command will take more than one attempt.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.

ComAp IG-NTC GC Specifications

General

Brand	ComAp
Model	IG-NTC GC
Category	Controller
Language	English