ComAp IG-NTC GC - Page 198

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
198
See the chapter Timers for more details about timers.
Binary input: Timer block 8
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #8.
NOTE:
See also the setpoint TimerChannel 8 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 9
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #9.
NOTE:
See also the setpoint TimerChannel 9 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 10
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #10.
NOTE:
See also the setpoint TimerChannel 10 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 11
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #11.
NOTE:
See also the setpoint TimerChannel 11 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.