ComAp IG-NTC GC - Page 199

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
199
Binary input: Timer block 12
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #12.
NOTE:
See also the setpoint TimerChannel 12 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 13
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #13.
NOTE:
See also the setpoint TimerChannel 13 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 14
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #14.
NOTE:
See also the setpoint TimerChannel 14 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 15
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #15.
NOTE:
See also the setpoint TimerChannel 15 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 16
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #16.
NOTE: