ComAp IG-NTC GC - Page 229

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
229
GCB UV COIL OUTPUT TIMING
There are also other outputs availabe for GCB control:
• BCB close/open
• BCB ON coil
• BCB OFF coil
Binary output: Syst res OK
Related FW
3.0
Description
The output is closed while the actual reserve is above the selected reserve for
start.
Binary output: Syst res 1 OK
Related FW
3.0
Description
The output is closed while the actual reserve is above the reserve for start from
the reserve set #1.
Binary output: Syst res 2 OK
Related FW
3.0
Description
The output is closed while the actual reserve is above the reserve for start from
the reserve set #2.
Binary output: Syst res 3 OK
Related FW
3.0