ComAp IM-NT-BB - Page 192

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
192
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #1. Output from this
channel is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.2 Setpoint: Timer channel 2
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #2. Output from this
channel is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.3 Setpoint: Timer channel 3
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #3. Output from this
channel is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.4 Setpoint: Timer channel 4
Group
Timer settings
Range [units]
[-]
Related FW
3.0