ComAp IM-NT-BB - Values; Table of Values

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
205
13 Values
13.1 Table of Values
13.1.1 Group: BusL values
13.1.1.1 Value: BusLImport
Group
BusL values
Units
kW
Related FW
3.0
Description
This value shows actual power flowing from busL to busR. This value is used
for various purposes (e.g. load shedding etc.).
13.1.1.2 Value: BLP L1
Group
BusL values
Units
kW
Related FW
3.0
Description
BusL active power in phase L1.
13.1.1.3 Value: BLP L2
Group
BusL values
Units
kW
Related FW
3.0
Description
BusL active power in phase L2.
13.1.1.4 Value: BLP L3
Group
BusL values
Units
kW
Related FW
3.0