ComAp IM-NT-BB - Page 210

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
210
13.1.1.22 Value: BusL V L1-N
Group
BusL values
Units
V
Related FW
3.0
Description
BusL voltage in phase L1.
NOTE:
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint VbL VT ratio.
13.1.1.23 Value: BusL V L2-N
Group
BusL values
Units
V
Related FW
3.0
Description
BusL voltage in phase L2.
NOTE:
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint VbL VT ratio.
13.1.1.24 Value: BusL V L3-N
Group
BusL values
Units
V
Related FW
3.0
Description
BusL voltage in phase L3.
NOTE:
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint VbL VT ratio.