InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
13.1.2.7 Value: BusR V L2-L3
BusR voltage phase L2 to L3.
13.1.2.8 Value: BusR V L3-L1
BusR voltage phase L3 to L1.
13.1.2.9 Value: BusR V unbal
BusR voltage unbalance. The value is calculated as maximal difference of
two phase voltages at one moment and expressed in % of the bus nominal
voltage.
13.1.2.10 Value: I Aux
This value shows actual current measured at auxiliar terminals.
13.1.2.11 Value: Slip freq
To Next Page
Loading...
