InteliLite Global Guide
238
Subgroup: Frequency Protection
Setpoint group Protections Related FW 1.9.0
Range [units] Enabled / Disabled / By LBI [-]
Default value Enabled Alternative config NO
Step [-]
Comm object 15670 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts the behavior of generator Generator Frequency protection. GCBclosing is blocked, if
the protection is disabled!.
Enabled:
Protection is enabled. Behavior of protection is adjusted via setpoints Generator
Overfrequency BOC (page 233), Generator Overfrequency Wrn (page 233),
Generator Underfrequency BOC (page 234), Generator Underfrequency Wrn
(page 234), and Generator <> Frequency Delay (page 234).
Disabled: Protection is disabled.
By LBI: Protection is enabled or disabled by the state of LBI PROTECTION ENABLE (PAGE 534).
Generator Frequency Protection
6 back to List of setpoints
Subgroup: Speed Protection
Setpoint group Protections Related FW 1.9.0
Range [units] Enabled / Disabled / By LBI [-]
Default value Enabled Alternative config NO
Step [-]
Comm object 15671 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts the behavior of generator Underspeed protection.
Enabled:
Protection is enabled. Behavior of protection is adjusted via setpoint Underspeed Sd
(page 207).
Disabled: Protection is disabled.
By LBI: Protection is enabled or disabled by the state of LBI PROTECTION ENABLE (PAGE 534).
Underspeed Protection
6 back to List of setpoints