ComAp intelilite nt amf25 User Manual

InteliLite
NT
– AMF20/25, SW version 2.2, ©ComAp – September 2014 78
IL-NT-AMF-2.2-Reference Guide.pdf
Step: 1 s
Range: 0 – 900 s
Hint:
First analog input is dedicated to Oil Pressure measurement. It is not supposed to be used for
measurement of other values.
AI2 Wrn [ ]
Warning threshold level for ANALOG INPUT 2
Step: 1 C
Range: -100 – 10000
AI2 Sd [ ]
Shutdown threshold level for ANALOG INPUT 2
Step: 1 C
Range: -100 – 10000
AI2 Del [s]
Delay for ANALOG INPUT 2 alarm.
Step: 1 s
Range: 0 – 900 s
AI3 Wrn [ ]
Warning threshold level for ANALOG INPUT 3
Step: 1 %
Range: -100 – 10000
AI3 Sd [ ]
Shutdown threshold level for ANALOG INPUT 3
Step: 1 %
Range: -100 – 10000
AI3 Del [s]
Delay for ANALOG INPUT 3
Step: 1 s
Range: 0 – 900 s
Batt Undervolt [V]
Warning threshold for low battery voltage.
Step: 0,1 V
Range: 8V – 40 (Battery >Volts)
Batt Overvolt [V]
Warning threshold for hi battery voltage.
Step: 0,1 V
Range: 8V – 40 (Battery <Volts)
Batt Volt Del [s]
Delay for low battery voltage alarm.
Step: 1s
Range: 0 – 600 s
WrnMaintenance [h]
Counts down when engine running. If reaches zero, an alarm appears. When the value 10000 is set,
than the Maintenance function is disabled and counter does not count. Counter value disappear in
controllers statistics. Maximum value for running countdown is 9999.

ComAp intelilite nt amf25 Specifications

General

Communication Ports	RS232, RS485, USB
Power Supply	8-36 VDC
Number of Digital Inputs	8
Number of Digital Outputs	8
Number of Analog Inputs	3
Number of Analog Outputs	2
Display	LCD with backlight
Supported Protocols	Modbus
Operating Temperature	-20°C to +70°C
Humidity	95% non-condensing
Weight	0.4 kg
Protection	IP65 (front panel)
Controller Type	AMF Controller
Storage Temperature	-30 to +80 °C