InteliVision 5 - New Features List
26
15.10 Message "Controller is locked"
In case a user has inserted wrong password for six times (the number of attempts can change according to
new controller SW version) to log into the controller, the controller is automatically locked for next login. When
the controller is locked and user tries to login into the controller, message (see Figure 8-4).
"Controller is locked. Try entering correct password after X min" is displayed.
Message informs about time remaining for unlocking of controller. The time in message is not actualized. For
actual time, user should open login dialog again.
Image 9.4 Controller is locked message
15.11 Change of all label color
The color of all texts and values was changed to be better readable from angles. The text color is white and
value color is aqua. See texts and values on right side of Access level indication (page 25).
15.12 Deviator limits
Limits of deviator and their values are displayed also in negative part of graph.
To Next Page
Loading...
Need help?
General
