IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
for picture how to find the message number.
Alarm output: UnivState 13
The output is closed while the alarm generated by the Universal analog protection,
where the Message #13 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 14
The output is closed while the alarm generated by the Universal analog protection,
where the Message #14 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 15
The output is closed while the alarm generated by the Universal analog protection,
where the Message #15 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: Bus meas error
The output closes when bus measurement protection is activated according to
description of Gener protect:BusMeasError setpoint.
To Previous Page
Loading...
Need help?
General
