Comar Systems CSA-300 - Units Display - Speed and Distance; Figure 31 Tanker Mode Exit Screen When Speed Exceeds 3 Knots

Operation
Page 30
Figure 31 Tanker mode exit screen when speed exceeds 3 knots
3.18 Units display - speed and distance
It is possible to override the default units through the ‘User settings’ menu. Press the menu key and then select
‘User settings’ followed by ‘Units’. You can now select either nautical or metric display of speed and distance
regardless of the AIS mode.
13:20:47
TANKER MODE:
Exiting Tanker Mode
Transmit Power is
High Power (12.5W)
OK
GPS
INT
Change Nav. Status?
Change
( Currently moored )
Back