Transmitter Error Codes
Under certain conditions the transmitter display can show an error. These errors can help in
diagnosing the reason a transmitter may fail to transmit data to the Gateway.
This is not an exhaustive list of errors only the most common will be described here.
Error Meaning Resolution
004 Fault with Radio Module Try removing the battery then replacing it.
100 Date and time lost.
Wait for the transmitter to receive correct date
and time from the Gateway.
400 Invalid Programmed Task Program a new task from the Gateway
500 Errors 100 & 400 combined. Resolve Error 100 & Error 400 individually.
Gateway Fault Conditions
Under certain conditions the Gateway Fault LED can flash to indicate an error. The possible
faults which can cause the Fault LED to flash are:
• Overheating
• Battery Pack fault
• Clock error
• Clock Battery error
• PSU fault
• Software errors
• Radio Module fault
To Next Page
Loading...
