Comdial DX-80 - Page 102

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-52
Program the appropriate extension(s) for Predefined Call Forward (Wrong #, Busy and No Answer):
• Input 01-101~156-29 (for the extension number) to program the appropriate extension Wrong #
Destination.
Or…
• Input 01-101~156-30 (for the extension number) to program the appropriate extension Busy
Destination.
Or…
• Input 01-101~156-31 (for the extension number) to program the appropriate extension No Ans
Destination.
• Press [save ]. This advances to the selected extension Predefined Forward database item.
• Press [chg] to change the value of this data item.
• Input the appropriate destination (this may be an extension number or UCD/Hunt Group number).
• Press [save ].
• Press the Volume button (up or down) to return to the DB Item Select screen.
Or…
• Use [back] or [next] to go to the appropriate database item for change.
Program the Predefined Forward Time as required:
• Press Volume button (up or down) to return to the DB Item Select screen.
• Input 03-39 to program the system Predefined (No Answer) Call Forward Time.
• Press [save ]. This advances to the Predefined FWD Time database item.
• Press [chg] until the appropriate value displays.
• Continue making other database changes, or... exit programming mode when changes are complete.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu.
Program the appropriate extension for the Predetermined Call Forward modes required:
• Use ¢£¤¥ to highlight “Extension.” Then press «.
• Use ¢£¤¥ to highlight “Predetermined FWD.” Then press «.
• Use ¢£¤¥ to highlight “Wrong # Dest.,” “Predef FWD Busy Dest.,” or “Predef FWD NoAns Dest.” for
the appropriate extension (extensions are listed along the left side of the screen under the column “DIR#).
• Press « select this database item for change.
• Input the destination directory number (extension or UCD/Hunt Group) then press «.
Note: Frequently the destination for a predefined forward – no answer condition will be to the VM
UCD/Hunt Group, that directory number is 433.