DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-39
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
• Use ¢£¤¥ to highlight “System Resource.” Then press «.
• Use ¢£¤¥ to highlight “Attendant.” Then press «.
• Use ¢£¤¥ to highlight the Attendant or Alternate Attendant for the Tenant Group you wish to
program. Then press «.
• Input the directory number of the extension.
• Press «.
• Continue making other programming changes as required.
• When you have completed all changes, press the ° (escape) key to exit this database-programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Call Back – Cancel All !##
This feature allows you to cancel all Call Backs on an extension or CO Line with one command.
Related Features
Call Back – CO Line Call Back – Extension
Related Programming
Call Handling – Tenant Calling
Operation
Prior to receiving Call Back Alert Ringing, press !,,.
To Next Page
Loading...
