Comdial DX-80 - Database Administration - Via PC-DBA

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-95
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation. The main Call Handling screen is again visible.
Program the Conference Tone Operation:
• Use ¢£¤¥ to highlight “Category 3.” Then press «.
• Use ¢£¤¥ to highlight “Conference Tone.” Then press «.
• Press « until the appropriate value displays. (Y/N)
• When you have completed all changes, press the ° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Database Administration – Via PC-DBA
The DX-80 system allows the installer/technician to administer system database parameters via an IBM
®
Compatible,
Personal Computer. The use of a PC has distinct advantages over programming the system via the digital telephone,
including: specific database archiving (via save function), remote programming, outboard programming (program the
system template into the PC memory then send it to the DX-80 when ready). The PC program that interfaces with the
DX-80 system is PC-DBA (PC-Database Administration).
PC-DBA requires the following resources in the PC environment:
• PC running DOS (PC-DBA can be run in a DOS Window but performance can be impacted by other Windows
®
modules. We do not warranty or guarantee any level of performance in the Windows environment.)
• 640k minimum RAM
• 386 minimum microprocessor
• 2 megabytes minimum space on the hard disk
Important Notice: PC-DBA is available via the Comdial Web page at www.comdial.com. This software is
not available by any other means. Use of this DX-80 utility requires a well-rounded understanding of the PC
environment and the DOS file structure. The manufacturer and/or supplier of PC-DBA cannot support users
who are unfamiliar with these basic requirements. If any of these issues concern you, please use Database
Administration via Any Digital Extension.