Comdial DX-80 - Attendant; Extension DSS Console Button Programming!,4

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-17
• Use ¢£¤¥ to highlight the next database item to be changed and follow the conventions used in the
previous steps to complete any other changes required.
• When you have completed all changes, press ° (escape) to exit System Reminder programming. You will
be prompted to confirm exit request; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave System Reminder unchanged.
• Press “Y” to save changes.
• You will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave System Reminder unchanged.
• Press “Y” to save changes.
• Continue making other programming changes or exit PC-DBA programming.
Program Attendant Extension User Password:
• The default password is 9999. Reference “Extension User Password” for programming instructions of this
feature.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Attendant / Extension DSS Console Button Programming
!,4
The Attendant/Extension DSS Console has 60 buttons that may be programmed for any of the available DX-80
system directory numbers. Forty-eight of the sixty buttons have dual colored LED’s and are user and/or system
programmable for any system directory number; System Speed Dial, CO Lines and DSS/BLF extensions. The
remaining twelve buttons on the Attendant/Extension DSS Console are not equipped with an LED and are better
suited for directory numbers of features that don’t require status indication (like Background Music).
Related Features
Attendant / Extension DSS Console
Related Programming
None
Operation
Note: [back], [next], [show], [chg], [bksp], and [save] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
1. Press !+4.
2. Press the programmable feature button on the console you wish to view or change.
3. Press [show ] to view more details.
Or…
4. [chg] to change the directory number for the selected button.
5. Input the valid Directory Number for the selected function.
6. Press [save ] to store the change.
7. Press a different button to make additional changes or exit button programming by toggling the On/Off
button, or by going off hook and back on hook with the handset.