DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-263
Related Features
Transfer Paging
Background Music Headset Mode
CO Line Ringing Assignment Speakerphone
Operation
Whenever a mode is active, press the Volume button up or down as necessary. The volume for this
mode/function is now set.
Conditions
a) You may adjust the ringing volume while the Digital Speakerphone is not in use or while it is ringing.
b) When adjusting the ring volume, the display will temporarily show the current setting.
c) When attempting to adjust the ringing volume beyond the highest or lowest setting, a single ring burst is
heard to indicate that further adjustment is not possible.
d) Volume settings affects receive loudness only. The person to whom you are speaking will not detect an
increase/decrease in volume.
Default Setting
At default the volume settings are as follows:
• Background Music = 4
• Ringing = 2
• Handset = 3
• Speaker (Includes speakerphone and page announcement volume) = 3
• Headset = 3
Warning Tone / CO Line Call Limiter
An extension can be limited to calls that are within a specific programmed time. The DX-80 can be set to warn an
extension that the time has expired thereby advising the user to disconnect. In this mode, a system Warning Tone is
heard repeatedly when the timer has expired. This feature is useful in a lobby or retail environment where lengthy
calls are to be discouraged.
The Call Limiter can also be deployed with greater call control. In this mode, moments after the warning tone is heard
the call is disconnected automatically by the system.
The CO Line Call Limiter can be set for extensions on a per extension basis and according to call type (outgoing or
incoming or both).
Related Features
CO Line calling Auto Redial
Speed Dial Memo Pad
Last Number Redial Saved Number Redial
Related Programming
Extension – Warning Tone
Extension – Drop Call In
Extension – Drop Call Out
Call Handling – Warning Time – Outgoing Call
Call Handling – Warning Time – Incoming Call
Conditions
a) This feature is not recommended as a “Toll Saver” option and should be used only for specific applications.
b) Additional calls can be made at the extension following the expiration of the Warning Tone/Drop Call
operation.
To Next Page
Loading...
