DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-61
Conditions
a) Each extension can have only one Camp On at the same time.
b) While waiting for a busy extension (Camp On invoked), the music connected to MC2 is heard.
Class of Service – Extension
The system provides eight (8), Classes of Service (COS) for assignment of outside line dialing-privileges. Each
system Extension may be assigned one Day COS and one Evening COS. The Extension COS is primarily used for
restriction and control of long distance dialing. Toll restriction tables allow customized dialing privileges to be
assigned to any or all COS.
System Speed Dial is specially linked with an Extension’s COS such that all speed dial numbers may override toll
restriction programming if designated to do so in Call Handling programming.
Related Features
Toll Restriction Account Code
Related Programming
Restriction – Toll Restriction, Account Code
Extension – Day Class of Service
Extension – Evening Class of Service
Call Handling – System SPD Toll Check
Default Settings
Extension – Class of Service – Day = 0 for all Extensions. (Range is 0-7.)
Extension – Class of Service – Eve = 0 for all Extensions. (Range is 0-7.)
Restriction – Toll Restriction – Interval 001 is set for all calls allowed and all COS (0-7). (See Toll Restriction
for specific programming of the toll tables.)
Programming Abstract
Program the Extension to follow the toll table programming Allow Digit Interval by assigning the associated
Day operation COS and Evening operation COS.
Programming via the DET (Digital Extension Terminal)
Note: [back], [next], [show], [chg], [bksp], and [save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“++++++++.” (Note: This eight-character password can be changed.)
• Press [show ]. The DB Item Select screen displays.
Program Extension COS per Extension and system operating mode (Day/Evening) (Index 01-101~156,
where “101~156” = the Extension directory number):
• Enter 01-101-05 to program Extension 101 Day COS. (COS can be 0-7.)
Or…
• Enter 02-101-06 to program Extension 101 Evening COS. (COS can be 0-7.)
• Enter 02-101-06 to program Extension 101 Evening COS. (COS can be 0-7.)
• Press [save ]. This advances to the selected database item.
• Press [chg] until the appropriate OCS displays.
To Next Page
Loading...
