DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-115
Related Features
Do Not Disturb Override Forced Intercom Call Forward
Do Not Disturb – One Time Feature Button Disable
Related Programming
Extension – Feature Button Disable
Operation – Set Do Not Disturb (DND)
1. While your telephone is idle (no other call activity) press !4.
2. Do Not Disturb is activated and the display momentarily displays:
DO NOT DISTURB
3. When the display reverts back to idle condition the set condition is indicated in the bottom row of the display.
The idle extension in DND shows:
SEP 25 MON 10:25
EXT DND 103
Analog Ports (Single Line Telephones)
1. Dial #4.
2. Repeat to clear.
Operation – Cancel Do Not Disturb (DND)
1. While your telephone is idle (no other call activity) press !4.
2. Do Not Disturb is deactivated and the display momentarily displays:
DND DELETE
3. When the display reverts back to idle condition the “DND” is removed from the display.
Conditions
a) Do Not Disturb cannot be enabled if you have activated Call Forward.
b) At any time while your digital speakerphone is idle, you may immediately divert an incoming tone ringing
intercom call to the attendant by using the DND feature – Forced Intercom Call Forward.
c) Any DSS/BLF button of your extension will flash when you activate DND.
d) The DND feature code may be programmed on a programmable feature button.
e) A feature button programmed for the DND code will light steady whenever DND is active
Do Not Disturb – One Time !4
DND – One Time allows you to block CO Line ringing (Transfer or direct) while engage in the current call. The
advantage of DND –One Time is that you don’t have remember to deactivate DND, it will automatically disable at the
conclusion of the current call.
Related Features
Call Forward Feature Button Disable
Intercom Forced Intercom Call Forward
Related Programming
Extension – Feature Button Disable
To Next Page
Loading...
