DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-64
• Press [next ] to advance to the Inserted Digits for this Alternate Route selection.
• If it is necessary to insert digits before sending the dialed digits when calls are routed to this alternate, input
the actual digits required here.
• Press [chg]. Input the required digits. (Up to 16 digits may be inserted.)
• Press [save ].
• Press [next ]. The display shows “ALTER. CO GP :_.” The next Alternate Route may now be programmed
for this CO Line Group (if required).
• Input the Alternate Route to program (1 for first alternate, or 2 for second alternate) for this CO Line Group.
• Press [show ] and continue programming as per the first alternate programming.
• When finished programming Alternate CO Line Routes, press the Volume button (up or down) to return to
the DB Item Select screen. Or… use [back] or [next] button to skip to the appropriate database item.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu.
• Use ¢£¤¥ to highlight “System Application.” Then press «.
• Use ¢£¤¥ to highlight “Category 2.” Then press «.
Program CO Line Groups for Alternate CO Line Groups:
• Use ¢£¤¥ to highlight “CO Line Application.” Then press «.
• Use ¢£¤¥ to highlight “Alternate CO Group.” Then press «. (Notice the display header “CO Line
Application - Alternate CO Group1: [1/2].” The “[1/2],” indicates that this is the first of two pages for this
database programming. Page 1 is Alternate Route 1 for this CO Line Group. Page 2 is Alternate Route 2 for
this CO Line Group.)
• Use ¢£¤¥ to highlight the database item to be changed: “CO Group Number,” “Delete Digits,”
“Inserted Digits.”
• Press « to change the data item value.
• For “CO Group Number,” input the CO Line Group that should be used as the alternate for this CO Line
Group. Then press «.
• For “Delete Digits,” input the quantity of digits to delete at the beginning of the actual digits dialed when
this alternate route is used. Then press «.
• For “Inserted Digits,” input the actual digits to insert before sending the actual dialed digits when this
alternate route is used. Then press «.
• Continue programming other database items as required.
• When you have completed all changes, press the ° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
To Next Page
Loading...
