DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-90
Programming via the DET (Digital Extension Terminal)
Note: [back], [next], [show], [chg], [bksp], and [save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“++++++++.” (Note: This eight-character password can be changed.)
• Press [show ]. The DB Item Select screen displays.
Program the Meet Me Conference Time. (03-37):
• Input 03-37. Then press [save ].
• Press [chg] until the Meet Me Conference Time displays.
• Continue making other programming changes or exit the programming mode.
Program the Conference Tone Operation. (03-23):
• Press the Volume button (up or down) to return to the DB Item Select screen.
• Input 03-23. Then press [save ].
• Press [chg] until the appropriate Conference Tone operation displays (Y/N).
• Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press «.
• Use ¢£¤¥ to highlight “Call Handling.” Then press «.
Program the Meet Me Conference Time:
• Use ¢£¤¥ to highlight “Category 2.” Then press «. The CO Line – Category 2 screen displays.
• Use ¢£¤¥ to highlight the database item Meet Me Conference Talk Time.
• Press «. Each time that enter is pressed the value of this database item is updated.
• When you have completed all changes, press the ° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• The main Call Handling screen is again visible.
To Next Page
Loading...
