DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-110
Conditions
a) 12 maximum DSS Consoles can be assigned in the DX-80 system.
b) DSS Consoles can be programmed with numbering plan directory numbers only (no Feature access codes
can be programmed on DSS Console buttons.)
Default Settings
System Resource – DSS Allocation – No ports assigned as DSS Consoles, no ports assigned as DSS
Console Owner extensions. (Range: any valid extension port Directory Number.)
Feature Key Programming – reference the Specifications section of this manual to review the default map of
DSS Console buttons.
Programming Abstract
• Program the associated digital port as a DSS Allocations – DSS Dir Number.
• Program the digital extension as the DSS Console Owner.
Programming via the DET (Digital Extension Terminal)
Note: [back], [next], [show], [chg], [bksp], and [save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“++++++++.” (Note: This eight-character password can be changed.)
• Press [show ]. The DB Item Select screen displays.
Program DSS Owner (04-14-1-01~12):
• Input 04-14-1-01~12, then press [save]. This advances to the DSS Allocation programming screen for the
DSS Console selected (1~12).
• Press [save ]. This advances to the DSS Owner screen and displays the current contents.
• Press [chg] to change the DSS Owner (the extension for which this DSS is to operate).
• Input the extension and then press [save].
• Press [next ] to advance to the next data item, DIR NUMBER.
• Press [chg] to change/enter the digital port directory number where the DSS is connected.
• Input the directory number of the digital port where the DSS Console is connected, then press [save].
• Press [save ].
• Press [next ] to enter more DSS Console data.
• Input the next DSS Unit number (1~12) to program.
• Press [show ].
• Follow the convention above for all DSS Console programming.
• Press the Hold button to exit DSS Allocation programming and return to the previous menu level.
• Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
To Next Page
Loading...
