Comdial DX-80 - Page 176

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-126
Individual Copy mode (copy one “source” extension data to other extensions one-at-a-time):
• Input 08-12-01, then press [save]. This advances to the INDIVIDUAL COPY programming screen.
• Press [show ]. This advances to the COPY FROM screen.
• Input the “source” extension directory number.
• Press [save ]. This advances to the COPY TO screen.
• Input an extension directory number where this data is to be copied, then press [save].
• The COPY TO screen is immediately prompted again and the data may be copied again to other
extensions. Repeat the process for all extensions to be copied with this data.
• Press the Hold button to exit Individual Copy programming and return to the previous menu level.
• Continue making other programming changes or exit the programming mode.
Group Copy mode (copy one “source” extension data to many other extensions via Pickup Group
association):
• Input 08-12-02, then press [save]. This advances to the GROUP COPY programming screen.
• Press [show ]. This advances to the COPY FROM screen.
• Input the “source” extension directory number.
• Press [save ]. This advances to the COPY TO screen.
• Input a Pickup Group directory number associated to the extensions where this data is to be copied, then
press [save].
• The COPY TO screen is immediately prompted again and the data may be copied again to another group
of extensions via another Pickup Group directory number. Repeat the process for all extension Pickup
Groups to be copied with this data.
• Press the Hold button to exit Individual Copy programming and return to the previous menu level.
• Continue making other programming changes
Or…
• Press the Hold button to return to the previous menu level or press the Volume button to return to the DB
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press «.
• Use ¢£¤¥ to highlight “System Application.” Then press «.
• Use ¢£¤¥ to highlight “Extension Copy.” Then press «.
• Select the appropriate copy technique:
“Individual” to copy programming from one extension to other extensions, one extension at a time.
”Group” to copy programming from one extension to a group of extensions, one group at a time.
• Press «. The cursor is positioned on the Source database item.