DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-197
Programming Abstract
• Program the PBX Code required to access, PBX Trunk dial tone. (If different than “9.”)
• Program the Search order of PBX circuits (for group access).
Programming via the DET (Digital Extension Terminal)
Note: [back], [next], [show], [chg], [bksp], and [save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“++++++++.” (Note: This eight-character password can be changed.)
• Press [show ]. The DB Item Select screen displays.
Program PBX Code for PBX Trunk access:
• Input 07-01-01~08, then press [save]. This advances to the PBX Code programming screen for the CO
Line Group selected (1~8).
• Press [chg].
• Input the PBX Code (e.g., 81) and then press [save].
• Press the Volume button to return to the DB Item Select screen.
Program Hunt Method (Search order) for the selected CO Line Group:
• Input 07-01-01~08-02, then press [save ]. This advances to the Hunting method programming screen for the
CO Line Group selected (1~8).
• Press [chg] until the appropriate order displays (SEQL = Sequential Last, SEQF = Sequential First, RAN =
Random access).
• Press the Hold button to return to the previous menu level or press the Volume button to return to the DB
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press «.
Program PBX Code for PBX Trunk access:
• Use ¢£¤¥ to highlight “CO Line Application” and then press «.
• Use ¢£¤¥ to highlight “Category 1” Then press «.
• Use ¢£¤¥ to highlight the database item “PBX Code” for the CO Group to be changed. Then press
«.
• Input the required code to access a PBX trunk on CO line circuit in this group.
• Press « to temporarily store this data.
To Next Page
Loading...
