DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 4-29
I/O Memory Mapping
Use I/O Memory Mapping when instructed to do so by a customer service representative. This operation is
used to view system Input/Output port values.
+---------------------------------------------------------------+
¦ The Engineering Maintenance Tools should only be used by ¦
¦ trained personnel. Attempts to access these tools without ¦
¦ knowledge of their use, can cause call processing and system ¦
¦ malfunctions or resets. All risks are assumed by the user ¦
+---------- ESC to Exit or Any other key to continue -----------+
+--------------------------------- DX80 PC-DBA --------------------------------+
¦ [Cnt] KSU Revision : K16UM0.F19 Date: 01/02/14 ¦
¦ Time: 21:09:38 ¦
¦ Engineering Maintenance Tool - I/O Memory Mapping ¦
¦ ¦
¦ I/O addr Value ¦
¦ --------- -------- ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ Enter Address : ¦
¦ ¦
¦ Note : Memory Address:(in hexadecimal format - xxxx) ¦
+----------------------------------- R16UM0.F21 -------------------------------+
To Next Page
Loading...
