Comelit Ultra Simplebus2 - Button LED Brightness Adjustment; Adjusting Button LED Brightness

26
LL
1
S1 S2
3
S1 S2
7 8
6
OFF
ON
1 2 3 4 6 75 8
2
ON
1 2 3 4 6 75 8
cod. 161
1
4 5
2
Adjusting the brightness of the button LEDs
Take note of the DIP-switch
settings
1. Enable
brightness control
2. Set the desired
function (code
161) and press
the confirm
programming
button
BEFORE you proceed:
Set ALL DIP-switches to OFF,
including DIP 6.
Reset the configuration of the
DIP-switches
Adjusting the button brightness
Press a button
repeatedly for each
module to change
the individual
brightness level of
the buttons